It definitely has a positive impact on the home’s value compared to a traditional wood deck.

Table of Contents

What are the disadvantages of Trex decking?

Is it worth the extra money for composite decking?

There is no doubt that composite decking material is more expensive than wood. However, it is valued for its striking resemblance to natural wood and efficiency making it an excellent choice for decking. It is easier to clean and maintain which makes it last long enough to transfer the same value to the next homeowner.

Does a Trex deck add value to a home?

Although trex decks are costly to build than composite decks, it can still raise the value of your home. A trex deck is not only eco-friendly, but also maintenance-free, and easy to install. For that reason, the return of investment of a trex deck is much higher than any other composite deck.

How long will Trex decking last?

Composite decking requires minimal upkeep and can last between 25 and 30 years. On average, plastic decking has a similar lifespan to composite decking and can last nearly 30 years.

Is Trex decking slippery when wet?

Trex decking is a low-maintenance decking solution that requires a fraction of the work of wood decks and is less likely to get slippery when wet. It still requires occasional attention to keep it looking its best, but you’ll be delighted with the finished results.

👉 For more insights, check out this resource.

Is Trex hot on your feet?

While wood gets hot enough to make walking with bare feet uncomfortable, composite decking gets even hotter. In some cases, Trex can become so hot that it may become unusable under intense, direct sunlight. The darker the Trex decking material, the more heat is retained.

What is a good size deck?

Size of Your Home Most builders suggest that your deck should be no larger than 20 percent of the house’s* square footage. This is so that the deck does not overwhelm a home visually. This, of course, is up to you. If you feel you need a larger deck that takes up more of your yard space, feel free!

How much should a Trex deck cost?

Trex decking costs $1,600 to $9,600, averaging about $4,800. That’s $5 to $12 per square foot for just decking boards and $5 to $15 per square foot for installation. Size is the biggest price factor, with 144 square feet ranging from $1,440 to $3,900 compared to $3,000 to $8,100 for 300 square feet.

👉 Discover more in this in-depth guide.

Can I replace my wood deck with Trex?

If the boards on your existing deck are looking a bit worn – and the foundation and deck framing system are sound – you can simply replace the walking surfaces and deck railings with Trex decking and railing. It’s an ideal way to save time and money, while enjoying all of Trex’s benefits over wood.

Article first time published on

Why is my composite deck warping?

Warping occurs when the decking’s surface is exposed to sunlight. The decking becomes hot and starts to distort gradually. It happens during thermal expansion when the decking absorbs heat from the sun and expands. The heat from the sun causes the decking to be flexible.

What is bad about composite decking?

Composite decking materials are weaker than natural wood, so they cannot support their own weight and may begin to sag if they are not properly supported. As a result, composite decks require smaller joist spacing than traditional wood decks to provide additional support.

Does Trex Select scratch?

The short answer is yes. Trex decking features a hard shell that not only resists scratching but is also formulated to withstand long-term exposure to the elements with less maintenance than wood decking.

Can I put Grill on Trex deck?

Yes, Gas grills are safe to use on a composite deck. Composite decking is designed to a minimum of Class C fire rating similar to wood decking. … As an extra layer of protection, people will often place a grill mat or pad to protect the decking from both heat and spills.

How do you maintain a Trex deck?

Spray deck with soap, then follow by gently scrubbing each deck board with a soft bristle brush. Spray/rinse each individual deck board using a fan tip no closer than 8-in (203 mm) from the decking surface. RINSE THOROUGHLY. If dirty water from cleaning is left to dry, a film will remain on the decking surface.

What is the best decking boards to use?

Cedar. Pros: Most purists love cedar and redwood decks, particularly due to their gorgeous, rich color. Cedar wood has a lovely natural hue and is widely available throughout the US. It’s also extremely lightweight, yet strong, making it ideal for places with inclement weather conditions.

Does Trex sag?

Your composite deck may not warp, but it can sag and buckle. Most sagging is caused by improper spacing between the joists when it is installed. … You will need to allow for drainage under composite decks. Any moisture trapped under composite decking, on top of wood joists, makes the joists susceptible to rot and decay.

Is Trex Select better than Trex Enhance?

Trex Select is also considered slightly more scratch-resistant than Enhance, and the line comes in one more color. … Trex’s 25-year warranty for fading and staining means you’ll get to pick a look you love and rest easy that it will continue to look good for decades to come.

Can you power wash Trex decking?

Use of a power washer will damage the decking surface and will void the warranty with respect to any condition caused by the power washing. Trex high-performance decking (Trex Transcend, Trex Enhance and Trex Select) can be power washed. Use only a fan tip and up to a 3100 psi power washer to remove dirt and debris.

Does Trex decking melt?

Trex decking will soften as low as 176 degrees Fahrenheit. … A fire-resistant material is installed under the fire pit and a protective “wall” made of stone or other fire resistant material is installed to hold the fire pit in place and also to protect the decking from heat.

What is the lightest composite decking?

Can you put ice melt on Trex decking?

Since there are no harmful chemicals in its composition, this ice melt is non-corrosive. Nothing is more delicate than your kids and pet. And if it is safe to use around them, then it’s definitely safe for your deck.

Is there a cheaper version of Trex?

Generally speaking, Trex and Fiberon offer the least expensive options while TimberTech and AZEK come in on the higher end. However, keep in mind that the higher-tiered grades of Trex are more expensive than the lower-tiered grades of Timbertech so it’s important to make sure you’re comparing apples to apples.

Is Timbertech more expensive than Trex?

Another thing you’ll want to consider is the price of both materials. Timbertech is more expensive than Trex, but that doesn’t mean Trex isn’t a quality product, because it is. What is this? Lastly, Trex doesn’t scratch nearly as easy as Timbertech.

How many Trex boards do I need for a 12x12 deck?

Board lengthBoards required8 FT20612 FT13716 FT10320 FT83

Will a deck increase my taxes?

How much will a deck affect taxes and resale value? According to IRS guidelines, building a deck is a capital improvement and may increase local property taxes. Taxes vary from city to city, so check with the local tax assessor before beginning construction or repair.

Is a 10x12 deck big enough?

A good size deck starts at 12 feet by 12 feet but can be as small as 8 feet by 8 feet for limited specialty use, such as a sitting area or a barbeque area just outside of the kitchen. Also deck should be no larger than the largest room in the house and not exceed 20% of the house square footage.

Do decks add value to a house?

Here’s a good one: many homeowners recoup a significant amount of the money they invest in their deck because the deck adds to the resale value of their home. … In fact, a survey from Home Remodeling magazine found that composite decks return about 74% of their original cost and wood decks return about 87%, on average.

How much does it cost to resurface a Trex deck?

A typical 24′ x 12′ deck (288 square feet) built with Trex decking will cost between $4,244 and $10,826 for materials and installation. Trex decking materials cost $8.25/sqft on average, while the average labor cost for decking is $7.52 per square foot.

Can I just replace deck boards?

If your existing deck is old, shabby and a maintenance nightmare, you don’t have to tear it all down and start over. Chances are that the structural parts are still in good shape. If so, you can simply remodel it with new decking, rails and stairs, and save tons of money over the cost of a complete rebuild.

What is deck refacing?

A deck reface is simply a remodeling, or renovation, of the deck’s façade. It is similar in concept to refacing the kitchen cabinets with new doors and drawer fronts; the decking and railing is removed from the existing framing and replaced, normally with composite decking and railing.