Diamond files are the latest evolution in chainsaw sharpening equipment. Diamond files are suitable for sharpening tungsten-carbide tipped chains. Due to their high-quality diamond coating, these files will last hundreds of tooth sharpens.

Table of Contents

Can you file carbide chainsaw chain?

Diamond files are the latest evolution in chainsaw sharpening equipment. Diamond files are suitable for sharpening tungsten-carbide tipped chains. Due to their high-quality diamond coating, these files will last hundreds of tooth sharpens.

Can you sharpen tungsten carbide?

Carbide tools require diamond for sharpening, due to their hardness. Wet grinding using an abrasive wheel on an automatic grinder is a very precise method of sharpening. It is also possible to sharpen a tool by using a diamond lap, but this is very imprecise and time-consuming.

How good are carbide chainsaw chains?

Now on to life, the few people that use them “claim” 4 to 5 times the life of a regular chain. They can take a lot more of a dirty environment than a normal chain. But carbide will dull just like anything else, if you hit rocks or the dirt very briefly you might not tell much difference.

Are carbide chains worth it?

Unless you plan on cutting asphalt shingles & nails, They’re just not worth it. If you have real dirty wood, the semi-chisel chain will stay sharp longer than full chisel.

👉 For more insights, check out this resource.

What will grind carbide?

A grinder with the appropriate wheel can easily grind tungsten carbide. Tungsten carbide is a very hard material made from tungsten and carbon. … Carbide tools and tips can be ground with a diamond grinding wheel, but grinding a tool evenly requires skill and practice.

Who makes hurricane chainsaw chain?

ALM Manufacturing offer a range of chains to fit Hurricane chainsaws.

👉 Discover more in this in-depth guide.

Is it worth sharpening a chainsaw chain?

The correct file to sharpen any given chain is worth less than five bucks. It will touch up a chain and keep it sharper than new literally a hundred times (assuming there is no physical damage to the chain). You can sharpen a chain until the little slash mark at the back of the tooth. It is, however, a learned skill.

Can you sharpen a carbide blade?

A good quality carbide blade can be sharpened 3-4 times before some or all the teeth need to be replaced and sharpening is a fraction of the cost of purchasing a new blade. … Carbide teeth are so hard, they can only be sharpened using an exceptionally fine grit diamond wheel.

Does Ace Hardware sharpen chainsaw chains?

Our experienced professionals will machine sharpen your chain saw for pitch-perfect cutting edges: tooth-after-tooth. Bring your chain saw into Steadman’s Ace Hardware and let one of the friendly, experienced mechanics give it a tune up.

Article first time published on

Is dirt bad for a chainsaw?

Don’t Cut Into Dirt Nobody plans to run their chain saw into dirt. … In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch. Plus, dirt wears the sprocket at the bar tip.

What is dirty wood?

Dirty wood is stuff that has been laying on the ground, or has dirt embedded in it. Or anything that has been skidded.

Is Hurricane chainsaw chain any good?

Affordably priced but still great quality, you can’t go wrong with Hurricane. Plus, if you need to replace the chain as well, then Jono & Johno have got your back — we have Hurricane bar and chain combos available too.

Can you grind carbide with a CBN wheel?

CBN wheels will even sharpen pure carbide bits and tools, although the life of the wheel will be compromised enough to probably not make it economically worthwhile. A wet CBN cutoff wheel will slice through carbide at the same speed as a diamond wheel, it just wears faster.

Which abrasive do you use for grinding carbide?

Silicon Carbide Harder than standard aluminium oxide with a very sharp abrasive grain. It is a versatile material, recommended for grinding relatively soft metals such as aluminium or cast iron but can also be used on extremely hard materials such as cemented carbide.

Will a grinder cut carbide?

Turn on the angle grinder and cut straight through the carbide. Allow the cutting wheel to do the work. Do not force the cutter through the carbide. This will cause excessive heat build up in the cutter and in the carbide.

What type of grinding wheels are used to grind carbide inserts?

Green silicon carbide wheels are more friable than the black wheels and used for tool and cutter grinding of cemented carbide. Cubic boron-nitride (CBN). Cubic boron-nitride is an extremely hard, sharp and cool cutting abrasive.

How are carbides formed?

Carbides are compounds composed of carbon and less electronegative elements and they are distinguished by their chemical bonding (ionic, covalent). They are generally prepared from metals or metal oxides at high temperatures (1500 °C or higher) by combining the metal with carbon.

How much does it cost to sharpen saw blades?

Diameter/Tooth CountPrice7.25” Diameter (40+ Teeth)$1410” Diameter (0-79 Teeth)$1710” Diameter (80+ Teeth)$1912” Diameter (0-79 Teeth)$20

What saw blades can be sharpened?

You can sharpen steel-toothed circular saw blades yourself using a file. Carbide-tipped blades need to be taken to a professional sharpening service for two reasons: Carbide is so hard that you need a diamond wheel sharpener for it, and sharpening carbide blades is so complicated that you can easily ruin the blade.

Can you sharpen Diablo blades?

At Diablo, we are constantly developing unique geometries to maximize your performance. To ensure your Diablo cutting tool continues its high performance standards, please contact one of our approved “Authorized Sharpening Service Centers”. …

Why does my chainsaw chain dull so quickly?

Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.

How many times can a chainsaw chain be sharpened?

To keep your saw cutting in a straight line, be a fanatic about filing each cutter with the same number of strokes and the same amount of pressure. Cutters can be sharpened up to 10 times or more before the chain needs replacing.

How long does a chainsaw chain stay sharp?

A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.

What's the best angle to sharpen a chainsaw chain?

Most standard chain is sharpened at 25-35 degrees for crosscutting wood and for ripping with the grain it’s best to use 10 degrees. So if you are cutting with the grain, you should be using 10 degree sharpened chain. They do make ripping chain that comes sharpened at 10 degrees for cutting with the grain of a log.

How tight should a chainsaw chain be?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.

How much does it cost to sharpen chainsaw chain?

HOW MUCH DOES IT COST FOR YOU TO SHARPEN MY CHAIN PROFESSIONALLY? If you bring the chain into our shop off your saw, our average chain sharpening price ranges from $13- $16.00, depending on the number of cutters. We are happy to remove and re fit your chain to your saw for a small additional fee.

How much is ace sharpening chainsaw?

Standard Chain, Off the Saw$7.50Carbide Chain, On the Saw$30.00Grind Depth Gauge$5.00True Bar Off Saw$5.50True Bar On Saw$7.50

How much does a chainsaw chain cost?

The average price for Chainsaw Chains ranges from $10 to $50.